Orbisphere High Pressure Hydrogen (H₂) TC sensor with nitrogen purge, protection cap, ext. temp. sensor (170 bar)

Orbisphere High Pressure Hydrogen (H₂) TC sensor with nitrogen purge, protection cap, ext. temp. sensor (170 bar)
Product #: 31290HP
Unit Price Contact Hach

Unique thermal conductivity (TC) sensor design

Selective and precise measurement of hydrogen in gaseous or liquid samples

No specific sample preparation required, the gas concentration is measured directly in the sample

Rugged construction can handle harsh plant conditions and high sample pressures

Flexibility of installation for better process control and very low maintenance

What's included?

Sensor only.
Controller, sensor cable, flow-chamber or process connection must be ordered separately.

Specifications

Accuracy: (Sample temp. 20 - 50°C within ± 5°C of calibration temperature)
The greater of
Membrane 29561A: ±1% of reading, or ±2 ppb, or ±0.03 cc/kg, or ±1.5 bar
Membrane 2952A: ±1% of reading, or ±8 ppb, or ±0.1 cc/kg, or ±6 mbar
Membrane 2935A: ±1% of reading, or ±25 ppb, or ±0.4 cc/kg, or ±20 mbar
Accuracy 2: (Sample temp. 0 - 50°C independent of calibration temperature)
The greater of
Membrane 2952A: ±3% of reading, or ±60 ppb, or ±0.6 cc/kg, or ±20 mbar
Membrane 2935A: ±3% of reading, or ±150 ppb, or ±2.5 cc/kg, or ±50 mbar
Application: Power
Certifications: 2004/108/EC - EN 61326-1
Cycle Time: 17 s
Flow Rate: Typical Flow Rate Membrane 29561A: 220 mL/min
Membrane 2952A: 200 mL/min
Membrane 2935A: 100 mL/min
Protection Class: IP65
Purge connection: Nitrogen Purge
Radiation Resistance Level: Membrane 29561A: 105 rad
Membrane 2952A: 108 rad
Membrane 2935A: 108 rad
Range: Range at 25 °C
Membrane 29561A: 0 - 2 ppm, or 0 - 25 cc/kg, or 0 - 1.5 bar
Membrane 2952A: 0 - 10 ppm, or 0 - 120 cc/kg, or 0 - 6 bar
Membrane 2935A: 0 - 20 ppm, or 0 - 220 cc/kg, or 0 - 12 bar
Response Time: 17 s
Sample Pressure: 0 - 170 bar
Temperature Range: -5 - 50 °C
Warranty: 6 months
Weight: 0.95 kg
What's included?: Sensor only.
Controller, sensor cable, flow-chamber or process connection must be ordered separately.